Toggle Nav
My Basket
  • Menu
  • Setting

O.L.E C2020 Tank Gauge +/-1% Kit 0.6m - 3m

More Information
Manufacturer N/A
Attachment No
Attached File No
Air Inlet No
Accuracy No
Amps No
ATEX Certified No
Auto Nozzle No
Av Air Consumption N/A
Badges Assembled in UK
Bore No
Box Quantity No
Breaking Force No
Cable 6m
Capacity No
Capillary No
Coil No
Connection No
Current N/A
dB No
Delivery No
Diameter No
Dimensions No
Disposable Bag No
Drum Cover No
Ends No
Filter Cup No
fittings N/A
Flow Rate No
Free Speed N/A
Head No
Height No
Hose Length No
Inlet No
Options No
Inlet Hose No
Inlet/Outlet No
Keg Size No
Length No
Lift No
Max Air Consumption No
Max Flow No
Max Flow Filter N/A
Max Inlet Pressure N/A
Max Pressure No
Max Run Time No
Max Temperature No
Max Weight No
Micron No
Min Flow No
Min Pressure No
Motor No
Mounting No
Oil Cup No
Option No
Outlet No
Pads No
Ports N/A
Pulses No
Ratio No
Reading Accuracy N/A
Register No
Reservoir No
Seals N/A
Shut Off Temperature No
Size No
Socks No
Sound N/A
Spout Od No
Suction No
Switch No
Tank Connection No
Tank Height No
Temp Range N/A
Thread N/A
Totaliser No
Transfer Pump Flow Rate No
Type No
Valve N/A
Vibration N/A
Voltage No
Warranty 1 Year
Weight No
Width No
Suitable With AdBlue®, Antifreeze, B100, Diesel
technical Documents No
Ship Time Next Working Day If ordered before 4pm. UK Mainland Only. (excludes Highlands, Ireland & Rest of the World)
In stock
  • Set up by us within 24hrs from receipt of our tank questionnaire or can be set up from the front panel.
  • Accuracy +/-1% of tank capacity.
  • Suitable with diesel, biodiesel up to B100, AdBlue® & antifreeze.
  • Suits tanks 0.6m ‑ 3m high. Probe can be extended to 100m. (TGE.CABLE)
  • Electronic display with backlight (turns off after 1 hour). Weatherproof to IP55.
  • Gives continuous readouts in litres & shows a % bar.
  • Power supply can be 230V, 100V or 24VDC.
  • Includes 4‑20ma output. Can connect to a BMS (building management system).
  • Tank probes are an electronic pressure sensor with a 1" BSPT male fitting.
  • Level probes must be suspended 50mm from the bottom of the tank.
  • 1 gauge required per tank.
  • Important: If extending the probe cable, it must be a low loss cable. Check specification required (TGE.CABLE)
  • Options:

  • TGE.C2020A with high/low level alarm, can also have a bund probe or water sensor option.
  • Choose between bund probe (TGE.BP) or water bottom sensor (TGE.WS).